End Milling Machine for Aluminum and UPVC profile LSDX04B-200

Short Description:

Professional for milling the end of aluminum alloy and uPVC profile in any angle between 35°and 90°, The Max. milling height is 90mm, the Max. milling depth is 60mm, the Max. milling width is 150mm.

Send email to us

Product Detail

Product Tags

Product Introduction

This machine is used for milling the end of aluminum alloy and uPVC profile in any angle between 35°and 90°, combined cutter structure, can customize the cutter according to the structure of the profile end surface. Equipped with 2.2KW direct-connected motor, the gas liquid damping device control the milling head feeding, the speed linear adjustment, high processing accuracy.

The Max. milling height is 90mm, the Max. milling depth is 60mm, the Max. milling width is 150mm.

Main Technical Parameter

Item	Content	Parameter
1	Input source	380V/50HZ
2	Working pressure	0.5～0.8MPa
3	Air consumption	50L/min
4	Total power	2.2KWW
5	Spindle speed	2800r/min
6	Milling angle range	35°～90°From any Angle between
7	Milling cutter specification	∮(115～180)mm×∮32
8	Milling height range	0～90mm
9	Milling depth range	0～60mm
10	Max. milling width	150mm
11	Cutting accuracy	Perpendicularity ±0.1mm
12	Dimension（L×W×H）	850×740×1280mm
13	Weight	200KG

Main Component Description

Item	Name	Brand	Remark
1	Low-voltage circuit breaker, AC Contactor	Siemens	Germany Brand
2	Button, Knob	Schneider	France Brand
3	Phase sequence protection	Anly	Taiwan Brand
4	Standard air Cylinder	Easun	Chinese Italian joint venture brand
5	Solenoid valve	Airtac	Taiwan Brand
6	Oil-water separator（filter）	Airtac	Taiwan Brand
Remark:when the supply is insufficient, we will choose other brands with the same quality and grade.