Product introduction
● Main Feature：
● The equipment can be milling the holes and slots both front and rear faces of the profiles, and then cutting the profiles 45° or 90° after the milling.
● High efficiency:
● 45° saw blade is driven by servo motor to ensure high speed and uniform cutting, high cutting efficiency.
● The laser head cutting and engraving can be automatically switched according to the process requirements. Laser cutting, high efficiency, good cutting quality.
● Mono-block casting type of main engine base. Three fixed angles: two 45° angle and one 90° angle.
● Wide range：cutting length 350～6500mm，width 110mm, height 150mm.
● The saw blade avoids sweeping the cutting surface while returning (our patent), not only improve the finish of the cutting surface, but also reduce the burrs, and greatly improve the service life of the saw blade.
● The patented "Z" fan double-layer fixture, to avoid the "Z" fan in the pressing process tilt;
● Without skilled workers, automatic feeding, drilling and milling, cutting, unloading and automatic printing and pasting bar code.
● With remote service function (maintenance, maintenance, training), improve service efficiency, reduce downtime, improve equipment utilization.
● After the profiles completed processing, the label will be automatically printed and pasted by the online printing and labeling machine, which is convenient for profile classification and subsequent data management.
● The equipment has flexible processing, intelligent production scheduling, intelligent equipment and humanized operation.
Data import mode
1.Software docking: online with ERP software, such as Klaes, Jopps, Zhujiang, Mendaoyun, zaoyi, Xinger and Changfeng, etc.
2.Network/USB flash disk import: import the processing data directly through network or USB disk.
3.Manual input.
The cutting unit is fully enclosed to protect, low noise, security, and environmental protection.
Equipped with auto scrap collector, the waste scraps are transported to waste container by conveyor belt, reduce cleaning frequency and improve work efficiency.
Main technical parameter
|
No. |
Content |
Parameter |
|
1 |
Input source | AC380V/50HZ |
|
2 |
Working air pressure | 0.5～0.8MPa |
|
3 |
Air consumption | 300L/min |
|
4 |
Total power | 19.5KW |
|
5 |
The laser head power | 2KW |
|
6 |
The cutting motor | 3KW 3000r/min |
|
7 |
Saw blade size | φ500×φ30×4.4 Z=108 |
|
8 |
Cutting section（W×H） | 110×150mm |
|
9 |
Cutting angle | 45°、90° |
|
10 |
Cutting accuracy | Cutting accuracy: ±0.15mm
Cutting perpendicularity: ±0.1mm Cutting angle: 5＇ Milling accuracy: ±0.05mm |
|
11 |
Cutting length | 350mm～6500mm |
|
12 |
Overall dimension（L×W×H） | 15500×4000×2500mm |
|
13 |
Total weight | 7800Kg |
Product Details
