Product Introduction
5 punching stations, it’s used to cut the angle for C grooves of the inwards and outwards opening sash, and punch the handle holes of the inwards opening sash, the connecting rod holes, universal water slots, and the mullion pin holes. Driven by hydraulic pressure, the Max. punching force is 48KN, the punching speed is 20times/min, it is more 20 times than the ordinary milling machine. The punching pass rate is 99%. Good punching effect, no scraps, no polluting the ground.
Main Technical Parameter
Item |
Content |
Parameter |
1 |
Working pressure | 0.6~0.8MPa |
2 |
Air consumption | 60L/min |
3 |
Max. Punching force | 16KN |
4 |
Punching station quantities | 4 station |
5 |
Punching stroke | 30mm |
6 |
Punching mold size | 340×240×500mm |
7 |
Dimension(L×W×H) | 340×240×1550mm |